icom7100 PSK31

Have searched the web and youtube and have found one video but it is in russian, I am using Fldigi, receiving ok but can not key the 7100.
Anyone else using psk31 with usb cable from ICOM 7100

I was the same , and wanted to set up the IC- 7100 with HAMRADIO DELUXE, until I found the right settings

Review this page:   http://www.romeo12.de/ index.php?option=com_content& view=article&id=195:icom-ic- 7100-und-ham-radio-deluxe- inbetriebnahme&catid=51: testberichte-mobilgeraete& Itemid=148

Make sure you have the right drivers first.
Then check to make sure your connectors are set properly for USB data.
These are the most common issues.  I can send you a screenshot of FLDIGI on my mac that works.

Baja DRH proporcionado gratuitamente baño:   http://www.iw5edi.com/ software / ham-radio-deluxe-5- descarga enlaces


ICOM IC-7100 and Ham Radio Deluxe commissioning
Go to: http://coilgun.info/hamradio/ic7100-fldigi.htm

Picture story to the IC-7100 to make sure with HamRadioDeluxe PSK capable.
In ascending order all the settings in the IC-7100 are displayed

Settings in HRD (Ham Radio Deluxe DM780) / Com port is different in each case and must be seen in the Control Panel to be.

https://translate.google.com/translate?hl=en?sl=auto&tl=en&u=http%3A//www.romeo12.de/index.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D195%3Aicom-ic-7100-und-ham-radio-deluxe-inbetriebnahme%26catid%3D51%3Atestberichte-mobilgeraete%26Itemid%3D148
Labels: , , , , ,

4 comments:

  1. Unknown3/14/2016

    I'm using my IC7100 in PSK31 with the program Digipan. I can receive and TX without any problem, Very simple configuration. If you have any doubt let me know,

    Best regards

    Francisco

    ReplyDelete
    Replies
    1. Unknown7/31/2016

      at first I could receive and not transmit. now I can transmit and not receive. I have no idea what I did to change this. Can you give me some hints of what to try/
      thanks. Tom k4thb

      Delete
    2. Unknown1/01/2018

      I'm having same problem with Digipan, can RX but can not TX. I'm using windows 10 and the usb connection that came with the IC-7100. Would appreciate any advise.

      Tom KE0JVS

      Delete
  2. Anonymous5/22/2016

    how do the DigiPan setting with icom ic 7100 ? I receive no problems, however, does not change in transmission

    ReplyDelete

.
Thanks for your comments, Comments may take a day to show up

Amateur Radio Users Support Group
https://groups.io/g/AmateurRadio

ICOM IC7300 IC-7300 SDR Transceiver
icom7300@groups.io
https://groups.io/g/icom7300

Icom 7610 Transceiver
Icom7610@groups.io
https://groups.io/g/Icom7610
.

Note: only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)